GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Blazer - 4WD - RHD 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Stop Lamp Switch Replacement

Removal Procedure
  1. Remove the left closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.

    2. Object Number: 883 Size: SH
  2. Disconnect the electrical connector from the stop lamp switch.

    3. Object Number: 344875 Size: SH
  3. Remove the pushrod retainer from the brake pedal pin.

    4. Object Number: 344886 Size: SH
  4. Remove the stop lamp switch. Unsnap the switch from the brake pedal pin.

Installation Procedure

    Object Number: 344886 Size: SH
  1. Install the stop lamp switch on the brake pedal pin. The switch will snap in place.

    2. Object Number: 344875 Size: SH
  2. Install the pushrod retainer on the brake pedal pin. The retainer will snap into place.

    3. Object Number: 883 Size: SH
  3. Install the electrical connector on the stop lamp switch.
  4. Install the left closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.