GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the left IP insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and Console.
  2. Remove the left knee bolster. Refer to Driver Knee Bolster Replacement in Instrument Panel, Gages and Console.

  3. Object Number: 365453  Size: SH
  4. Remove the blower motor relay from the IP tie bar.
  5. Disconnect the electrical connector from the blower motor relay.

Installation Procedure


    Object Number: 365453  Size: SH
  1. Connect the electrical connector to the blower motor relay.
  2. Install the blower motor relay to the IP tie bar.
  3. Install the left knee bolster. Refer to Driver Knee Bolster Replacement in Instrument Panel, Gages and Console.
  4. Install the left side IP insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and Console.