For 1990-2009 cars only
- Install the oil transfer tube fittings (2 and 4) to the large and small oil tanks and tighten to 35 N·m (26 lb ft).
- Assemble the transfer tube (3), large tank (5) and small tank (1).
- Install the clamp (1).
- Tighten the nut (1). With the nut of the clamp positioned so that the face of the nut is flush with the end of the bolt, rotate the nut clockwise 21 complete turns to apply tension to the clamp.
- Install the O-ring (1) to the tube.
- Install the tube (2) to the large tank (3).
- Install the O-ring seal (4).
- Assemble the upper (3) and lower (5) portions of the large tank. Aligning the markings made prior to disassembly.
- Inspect for proper installation of the tube to top tank. The top of the tube (2) should locate into the opening (1) in the top portion of the tank.
- Install the bolts (1) and bolt/studs (2) to the tank and tighten to 25 N·m (18 lb ft). Note the locations of the bolt/studs during reassembly.
- Install the oil level indicator (1) and oil fill cap (2).
Caution: Refer to Fastener Caution in the Preface section.
