1

Inside Rearview Mirror Electrical Connector Cover

2

Inside Rearview Mirror Electrical Connector

3

Inside Rearview Mirror Set Screw

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Adjust the mirror to the full upward position.
2. Loosen the set screw located at the base of the mirror.
3. Slide the mirror upward off of the rearview mirror button.

Tighten
2 N·m (18 lb in)

4

Inside Rearview Mirror

Procedure

Refer to Control Module References for programming and setup information.