GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2010 🢒 Camaro 🢒 Transmission 🢒 Automatic Transmission - 6L45/6L50/6L80/6L90 🢒 Transmission Control Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 2182222 Size: SH
  2. Remove the shift control linkage adjustment bolt (1).
  3. Disconnect the shift control linkage rod from the shift control assembly.

    4. Object Number: 2182224 Size: SH
  4. Remove the four shift control retaining nuts (1)
  5. Lower the vehicle.
  6. Remove the front floor console cover. Refer to Front Floor Console Front Cover Replacement.

    7. Object Number: 2182501 Size: SH
  7. Remove the four retainer screws (1).
  8. Disconnect the electrical connector from the shift control assembly.
  9. Remove the shift control assembly from the tunnel reinforcement.

Installation Procedure
  1. Install the shift control assembly to the tunnel reinforcement.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2182501 Size: SH
  2. Install the shift control assembly retaining screws (1) and tighten to 30 N·m (22 lb ft).
  3. Install the electrical connector to the shift control assembly.
  4. Install the front floor console cover. Refer to Front Floor Console Front Cover Replacement.
  5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    6. Object Number: 2182224 Size: SH
  6. Install the shift control assembly retaining nuts (1) and tighten to 30 N·m (22 lb ft).

    7. Object Number: 2182222 Size: SH
  7. Connect the shift control linkage rod to the shift control assembly.
  8. Install the shift control linkage adjustment bolt finger tight.
  9. Adjust the shift control linkage. Refer to Shift Control Linkage Adjustment.
  10. Lower the vehicle.