Preliminary Procedures

1. Raise and support the vehicle.
2. Remove the transmission fluid pan.
3. Remove the manual shaft detent assembly roller.

1

Manual Shaft Detent Lever Hub Pin

Procedure

1. Discard the pin. Replace with a NEW pin.
2. "Walk" the pin out using side cutters.

2

Manual Shift Shaft Pin

Procedure

1. Discard the pin. Replace with a NEW pin.
2. "Walk" the pin out using side cutters.

3

Manual Shift Shaft

4

Manual Shift Shaft Seal

Procedure

1. The manual shaft must be removed to replace the manual shaft seal.
2. Use the J 45201 to remove the seal from the transmission case.
3. Use the DT 47770 to install the seal into the transmission case.

Special Tools