GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Position the shift lever in PARK.
  2. Raise and support the vehicle.

  3. Object Number: 2182222  Size: SH
  4. Remove the bolt (1) from the shift control linkage rod.
  5. Disconnect the shift control linkage rod from the shift control assembly.

  6. Object Number: 2182220  Size: SH
  7. Remove the manual shift shaft nut.
  8. Remove the shift control linkage from the vehicle.

Installation Procedure


    Object Number: 2182220  Size: SH
  1. Install the shift control linkage to the vehicle.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the manual shift shaft nut and tighten to 15 N·m (11 lb ft).

  4. Object Number: 2182222  Size: SH
  5. Connect the shift control linkage rod to the shift control assembly.
  6. Install the bolt (1) to the shift control linkage rod.
  7. Adjust the shift control linkage.
  8. Lower the vehicle.