For 1990-2009 cars only
Removal Procedure
- Disconnect the clutch master cylinder push rod (1) from the clutch pedal pin (2).
- Remove the clutch fluid reservoir (1) hose from the clutch pedal assembly, then plug hose.
- Disconnect the clutch actuator pipe assembly (2) from the clutch pedal assembly.
- Remove the two clutch master cylinder fasteners (1) from the right side of the clutch pedal assembly.
- Remove the two clutch master cylinder fastener (1) from the left side of the clutch pedal assembly.
- Remove the clutch master cylinder (1) and the spacer (2) from the clutch pedal assembly.
Installation Procedure
- Install the clutch master cylinder (1) and the spacer (2) to the clutch pedal assembly.
- Install the two clutch master cylinder fastener (1) to the left side of the clutch pedal assembly and tighten to 20 N·m (15 lb ft)
- Install the two clutch master cylinder fasteners (1) to the right side of the clutch pedal assembly and tighten to 20 N·m (15 lb ft)
- Connect the clutch master cylinder push rod (1) to the clutch pedal pin (2).
- Connect the clutch actuator pipe assembly (2) to the clutch pedal assembly.
- Connect the clutch fluid reservoir hose (1) to the clutch pedal assembly.
- Check for proper clutch pedal movement and operation.
- Bleed the hydraulic clutch system. Refer to Hydraulic Clutch Bleeding
Caution: Refer to Fastener Caution in the Preface section.
