Transmission Control Replacement Floor Shift Control

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.



2. Remove the automatic transmission range select lever cable from the selector lever.



3. Remove the range select lever cable from the cable bracket.
4. Remove the center console.



5. Remove the range select lever cable from the automatic transmission control.
6. Remove the cable grommet at the cowl.
7. Remove the cable from the vehicle.

1. Install the cable to the vehicle through the cowl and the carpet.
2. Install the cable grommet in the cowl.
3. Install the range select lever cable at the automatic transmission control.
4. Install the center console.



5. Install the range select lever cable to the cable bracket.



6. Install the range select lever cable to the selector lever.
7. Connect the negative battery cable.
8. Adjust the cable.

8.1.	Place the shift lever in N (Neutral). Rotate the selector shaft clockwise from P (Park) through R (Reverse) into N (Neutral).

8.2.	Place the shift control assembly in N (Neutral).

8.3.	Push the tab on the cable adjuster in order to adjust the cable in the cable mounting bracket.

Transmission Control Replacement Floor Shift

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.



2. Remove the automatic transmission control lever handle.
3. Remove the console.



4. Remove the range select lever cable from the automatic transmission control.
5. Remove the electrical connector.



6. Remove the automatic transmission control bolts.
7. Remove the automatic transmission control.

1. Install the automatic transmission control.
2. Install the automatic transmission control bolts.
3. Install the electrical connector.



4. Install the range select lever cable to the automatic transmission control.
5. Install the console. Refer to Console Replacement in Instrument Panel, Gauges and Console.



6. Install the automatic transmission control lever handle.
7. Connect the negative battery cable.