GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Cavalier 🢒 Engine 🢒 Engine Controls - 2.2L 🢒 Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure

    Object Number: 207331 Size: SH
  1. Remove the purge valve electrical connector.

    2. Object Number: 207335 Size: SH
  2. Remove the hoses to the purge valve.

    3. Object Number: 207339 Size: SH
  3. Remove the purge valve (1) from the mounting bracket (2).

    4. Object Number: 207342 Size: SH
  4. When replacing the bracket, remove the purge valve mounting bracket attaching nut (1).
  5. Remove the purge valve mounting bracket (2).

Installation Procedure

    Object Number: 207342 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the purge valve mounting bracket (2) and the attaching nut (1).

    2. Tighten
    Tighten the purge valve mounting bracket attaching nut to 8-12 N·m (70-106 lb in).


    Object Number: 207339 Size: SH
  2. Slide the purge valve (1) into the mounting bracket (2).

    3. Object Number: 207335 Size: SH
  3. Install the hoses to the purge valve.

    4. Object Number: 207331 Size: SH
  4. Install the valve electrical connector.