Tools Required

J 35749 Oil Pressure Switch Socket

Caution: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Disconnect the electrical connector.
3. Remove the engine oil pressure sensor (1) usingJ 35749 .

1. Install the engine oil pressure sensor (1) using J 35749 .
2. Connect the electrical connector.
3. Lower the vehicle.