Tools Required

J 41352 Modular Column Holding Fixture

1. Install the steering column into J 41352 .
2. Tilt the column in the "up" position

Caution: The tilt spring and the spring guide are under pressure. The tilt spring and the spring guide may become a projectile. Secure the spring with locking pliers during removal. Secure the spring with locking pliers during installation. Bodily injury may result during removal and installation of the tilt spring and the spring guide. Always use caution during removal and installation of the tilt spring and the spring guide.

3. Turn the spring retainer (3) clockwise and release to remove the spring retainer (3).
4. Remove the tilt spring (2) and the spring guide (1).
5. Remove the spring guide (1) from the tilt spring (2).