GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

  1. Turn the ignition switch to ON.
  2. Turn the mode selector to VENT.
  3. Turn the blower switch to HIGH.
  4. Disconnect the heater-a/c and rear defogger control assembly harness connector C2.
  5. Connect the fused jumper between terminal D of the heater-a/c and rear defogger control assembly harness connector C2 and ground.

Does the blower motor operate?

--

Go to Step 2

Go to Step 3

2

Replace the blower switch.

Did you complete the repair?

--

Go to HVAC Blower Controls System Check

--

3

Repair the open in CKT 52 between S124 and the heater-a/c and rear defogger control assembly. Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to HVAC Blower Controls System Check

--