GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Cavalier 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Tail Lamp Replacement

Removal Procedure

    Object Number: 283979 Size: SH
  1. Disconnect the tail lamp wire harness sockets (6).
  2. Remove the tail lamp nut (1).
  3. Remove the tail lamp (5).

Installation Procedure

    Object Number: 283979 Size: SH
  1. Install the tail lamp (5).
  2. Align the tail lamp to the deck lid applique.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the tail lamp nut (1).

    4. Tighten
    Tighten the tail lamps nuts to 5 N·m (44 lb in).

  4. Connect the tail lamp wire harness sockets (6).