Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Audible Warnings Diagnostic System Check? | -- | Go to Step 2 | |||||
2 |
Did the test light illuminate? | -- | Go to Step 3 | Go to Step 4 | ||||
3 |
Did the test light illuminate? | -- | Go to Step 10 | Go to Step 13 | ||||
4 | Measure the voltage between the multi-function alarm module connector C1 terminal K and ground. Is the voltage equal to the specified value? | 0 V | Go to Step 6 | Go to Step 5 | ||||
5 | Repair a short to B+ between the multi-function alarm module connector C1 terminal K and one of the following terminals:
Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |||||
6 |
Is the resistance within the specified range? | 0-2 ohms | Go to Step 8 | Go to Step 7 | ||||
7 | Repair an open between the multi-function alarm module connector C1 terminal K and the seat belt switch connector terminal A. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |||||
8 | Measure the resistance between the left front seat belt connector terminal B and ground. Is the resistamce within the specified range? | 0-2 ohms | Go to Step 12 | Go to Step 9 | ||||
9 | Repair an open between the seat belt switch connector terminal B and ground. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |||||
10 |
Is the resistance infinite? | ∞ | Go to Step 12 | Go to Step 11 | ||||
11 | Repair a short to ground between the multi-function alarm module connector C1 terminal K and one of the following terminals:
Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |||||
12 | Replace the left front seat belt switch.Refer to Seat Belt Side Buckle Replacement - Driver . Did you complete the repair? | -- | Go to Step 13 | |||||
13 | Replace the multi-function alarm module. Refer to Multifunction Alarm Module Replacement . Did you complete the repair? | -- | -- |
