The optional window defogger system consists of
a tinted window that
has the following parts baked into the inside of the surface during the
window forming operation:
| • | A number of horizontal ceramic silver compound element lines |
The feed wire terminal is soldered to the bus bar on the driver's
side. The ground wire terminal is soldered to the bus bar on the passenger
side.
The defogger system operates on 12 volts. Under some
conditions, you may not detect heat by using a finger touch. The length of
time necessary in order to remove interior fog from the rear window may
vary according to the following conditions:
| • | The outside window pressure |
| • | The atmospheric pressure |
| • | The number of passengers |
The window defogger system uses an instrument panel mounted
switch using an integral indicator lamp. The system operates for approximately
10 minutes until an automatic timer turns the system off. When the
system is turned on again, the system operates for 5 minutes and
turn off.
You may turn the system off during this operating period
by turning one of the following components to OFF:
| • | The instrument panel mounted switch |
