Front Bumper Fascia Replacement Chevrolet

1. Remove the right splash shield, forward of the front wheel. Refer to Wheelhouse Splash Shield Replacement in Body Front End.
2. Remove the left splash shield, forward of the front wheel. Refer to Wheelhouse Splash Shield Replacement in Body Front End.



3. Remove the bolts (1) that retain the fender to the fascia (2).



4. Remove the retainers from the top of the fascia (1).
5. Remove the fascia (1) from the impact bar (3).
6. Disconnect the following connectors:

•	The park lamps

•	The turn lamps

1. Connect the following connectors:

•	The park lamps

•	The turn lamps




2. Install the fascia (1) to the impact bar (3).
3. Install the retainers to the top of the fascia (1).




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the bolts (1) to the following components:

•	The fender

•	The fascia (2)

Tighten
Tighten the bolts to 10 N·m (89 lb in).

5. Install the left splash shield forward of the front wheel. Refer to Wheelhouse Splash Shield Replacement in Body Front End.
6. Install the right splash shield forward of the front wheel. Refer to Wheelhouse Splash Shield Replacement in Body Front End.

Front Bumper Fascia Replacement Pontiac

1. Remove the right splash shield, forward of the front wheel. Refer to Wheelhouse Splash Shield Replacement in Body Front End.
2. Remove the left splash shield, forward of the front wheel. Refer to Wheelhouse Splash Shield Replacement in Body Front End.



3. Remove the bolts (2) that retain the fender to the fascia (3).



4. Remove the retainers (2) from the top of the fascia (1).
5. Remove the fascia (1) from the impact bar (3).
6. Disconnect the following connectors:

•	The park lamps

•	The turn lamps

1. Connect the following connectors:

•	The park lamps

•	The turn lamps




2. Install the fascia (1) to the impact bar (3).
3. Install the retainers (2) to the top of the fascia (1).




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the bolts (2) to the following components:

•	The fender

•	The fascia (3)

Tighten
Tighten the bolts to 10 N·m (89 lb in).

5. Install the left splash shield forward of the front wheel. Refer to Wheelhouse Splash Shield Replacement in Body Front End.
6. Install the right splash shield forward of the front wheel. Refer to Wheelhouse Splash Shield Replacement in Body Front End.