The passenger front seat E-Z entry system has the adjuster release lever (3) located on the outer adjuster. The inner adjuster acts as a slave unit. Perform the following steps in order to activate the inner adjuster:

1. Lift the seat back latch.
2. Move the seat back forward.

When you enter the rear seating area, the forward movement of the seat back trips a cable. The cable releases a lock bar on the adjuster. This action allows the seat to move forward in order to provide more room for passenger entry into the rear seat.

Apply rearward pressure to the top of the seat back in order to return the seat to the original position. The seat moves rearward until the E-Z entry lock feature engages.

Normal seat adjuster travel is 180 mm (7 in) from the full rear position to the full forward position. The E-Z entry adjuster travel is 140 mm (5.5 in) when the seat is in the full-rear position.

1. Remove the driver or passenger front seat. Refer to Seat Replacement .



2. Remove the E-Z entry adjuster cable from the seat adjuster (2).
3. Remove the E-Z entry adjuster cable from the front seat recliner assembly (9).
4. Remove the front seat recliner. Refer to Front Seat Recliner Replacement .

1. Install the front seat recliner. Refer to Front Seat Recliner Replacement .



2. Install the E-Z entry adjuster cable to the front seat recliner (9).
3. Install the E-Z entry adjuster cable to the seat adjuster (2).
4. Install the driver or passenger front seat. Refer to Seat Replacement .