For 1990-2009 cars only
- Depress and hold the readjustment tab.
- Pull the cable conduit out until the slider mechanism hits the stop.
- Release the button.
- Position a 17 mm socket and torque wrench onto the throttle body pulley cam assembly.
- Rotate the torque wrench to the full wide open throttle position and apply 7-10 Nm. (62-69 in lbs) torque.
- Release the applied pressure on the torque wrench.
- Remove the torque wrench and socket
- Check that the cable moves freely. The cable may appear to function properly with the engine stopped and cold. Recheck the engine after the engine is hot.
- Road test the vehicle. Refer to Road Test .
Important: Audible clicks will be heard during this step.
