The remote control door lock receiver system uses a security method that may cause the transmitter to require resynchronization. The transmitter does not send the same signal twice to the receiver. The receiver will not respond to a signal the transmitter has sent previously. The above condition prevents recording the signal and playing back the signal from the transmitter.
Resynchronization does not send the mathematical formula to the receiver. Resynchronization verifies the previously programmed mathematical formula in the transmitter. Resynchronization only works if the transmitter is already programmed.
Resynchronization may be necessary for the following conditions:
| • | The transmitter battery is very weak. |
| • | The transmitter battery is changed. |
| • | The vehicle battery is very weak. |
| • | The vehicle battery is disconnected. |
| • | The transmitter is pressed greater than 255 times outside the range of the receiver. |
Use the following procedure to resynchronize the transmitter with the receiver:
- Depress the LOCK and the UNLOCK buttons on the transmitter simultaneously for 7 seconds.
- The receiver will acknowledge resynchronization in one of the following methods:
| • | If all of the doors are locked, the receiver will lock and unlock all of the doors except the driver's door. |
| • | If all of the doors are unlocked, the receiver will lock all of the doors. |
