Power Door Lock Switch Inoperative - Left Side or Right Side Right Side
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
|
Important: A short will cause an open fuse(s). Before performing this diagnostic procedure, inspect the fuse(s) for an open. | ||||
1 | Did you perform the power door locks system check? | -- | Go to Step 2 | |
2 | Connect a test light between the right door lock switch connector terminal F and ground. Does the test light illuminate? | -- | Go to Step 3 | Go to Step 4 |
3 | Connect a test light between the right door lock switch connector terminal A and terminal F. Does the test light illuminate? | -- | Go to Step 5 | Go to Step 6 |
4 | Repair an open in CKT 1240 between the right door lock switch and the fuse block. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
5 | Connect the test light between the right door lock switch connector terminal G and terminal F. Does the test light illuminate? | -- | Go to Step 8 | Go to Step 9 |
6 | Measure the resistance in CKT 250 between the right front door lock switch connector terminal A and ground. Is the resistance within the specified range? | 0-2 ohms | Go to Step 20 | Go to Step 7 |
7 | Repair an open in CKT 250 between the right front door lock switch connector terminal A and G302. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
8 |
Does the test light illuminate? | -- | Go to Step 11 | Go to Step 12 |
9 | Measure the resistance in CKT 250 between the right front door lock switch connector terminal G and ground. Is the resistance within the specified range? | 0-2 ohms | Go to Step 19 | Go to Step 10 |
10 | Repair an open in CKT 250 between the right front door lock switch connector terminal G and G302. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
11 |
Does the test light illuminate? | -- | Go to Step 14 | Go to Step 15 |
12 | Inspect for a faulty connection at the right door lock switch connector. Is the connection OK? | -- | Go to Step 19 | Go to Step 13 |
13 | Repair the faulty connection at the right door lock switch connector. Refer to Connector Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
14 |
Is the resistance within the specified range? | 0-2 ohms | Go to Step 17 | Go to Step 18 |
15 | Inspect for a faulty connection at the right door lock switch connector. Is the connection OK? | -- | Go to Step 20 | Go to Step 16 |
16 | Repair the faulty connection at the right door lock switch connector. Refer to Connector Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
17 | Measure the resistance in CKT 195 between the right door lock switch connector terminal B and the left door lock switch connector terminal G. Is the resistance within the specified range? | 0-2 ohms | Go to Door Lock Motor Test | Go to Step 19 |
18 | Repair an open in CKT 194 between the right door lock switch connector terminal C and the left door lock switch connector terminal A. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
19 | Repair an open in CKT 195 between the right door lock switch connector terminal B and the left door lock switch connector terminal G. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
20 | Replace the right door lock switch. Refer to Door Lock Switch Replacement . Did you complete the repair? | -- | -- | |
