GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Cavalier 🢒 Body and Accessories 🢒 Doors 🢒 Receiver Replacement

Removal Procedure

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Disconnect the negative battery cable.
  2. Open the rear compartment.
  3. Remove the left inner trim panel.

    4. Object Number: 280287 Size: SH
  4. Disconnect one of the electrical connectors (3 or 4).
  5. Remove the push pins.
  6. Remove the remote control door lock receiver (1).

Installation Procedure

    Object Number: 280287 Size: SH
  1. Install the remote control door lock receiver  (1) to the rear compartment brace.
  2. Install the push pins to the brace.
  3. Connect the electrical connector (3 or 4).
  4. Install the rear compartment trim.
  5. Close the rear compartment.
  6. Connect the negative battery cable.
  7. Reprogram the new receiver to the transmitter(s). Refer to Transmitter Programming .