Removal Procedure
- Place the sunroof into the vent position.
- Place the sunroof sunshade (2) into the
open position.
- Push the guide on the left front sunroof sunshade toward the middle
of the vehicle.
This will overcome the spring pressure and disengage the guide on the
left front sunroof sunshade.
- Use a flat bladed tool in order to disengage the left front sunroof
sunshade.
- Slide the sunroof sunshade (2) into the closed position.
- Push the guide on the left rear sunroof sunshade toward the middle
of the vehicle.
This will overcome the spring pressure and disengage the guide on the
left rear sunroof sunshade.
- Use a flat bladed tool in order to disengage the left rear sunroof
sunshade.
- Remove the sunroof sunshade (2) from the vehicle using
the following procedure:
8.1. | Pull the sunroof sunshade (2) towards the left side of
the vehicle in order to disengage the guides on the right side sunroof sunshade. |
8.2. | Pull the sunroof sunshade out between the glass panel and the
roof. |
- Remove the sunroof sunshade handle (4) from the sunroof
sunshade by compressing the back side of the sunroof handle (4) together
and sliding the sunroof handle (4) out.
Installation Procedure
- Install the sunroof sunshade handle (4)
into the sunroof sunshade (2) by pressing the sunroof sunshade handle (4)
into place until the tabs seat behind the sunroof sunshade (2).
- Install the sunroof sunshade (2) into the vehicle between
the roof and the glass panel.
- Close the sunroof.
- Position the guides on the right side sunroof sunshade to the
guide rail.
- Engage the guide on the left rear sunroof sunshade to the guide
rail.
Use a flat bladed tool.
- Slide the sunroof sunshade (2) to the open position.
- Engage the guide on the left front sunroof sunshade to the guide
rail.