Checks
| Cause
|
Manual Linkage (701-704)
| Misadjusted
|
TV Cable
| Misadjusted, unhooked, bound, or broken
|
Oil Level
| Low
|
Governor (4) or Speed Sensor (4) (depending
on model)
|
| • | The cover is worn (9) |
| • | A thrust washer is missing (6) |
| • | The governor seal is worn or cut (7) |
| • | The governor spring is not seated (4) |
| • | The governor weights are binding on the pin (4) |
| • | A ball is missing (4) |
| • | The governor driven gear is stripped (4) |
|
Intermediate
Servo (128-137)
|
| • | The apply pin is incorrect or sticking (129) |
| • | Seals are cut, damaged, or missing (128, 132, 134) |
| • | The piston is sticking or is damaged (133) |
| • | Porosity in the case servo bore (15) |
|
Control
Valve Assembly (21)
|
| • | Spacer plate gaskets are leaking or are incorrectly installed
(19, 20) |
|
Valve Body
Spacer (20)
|
| • | The governor feed orifice to the 1-2 and 2-3 shift |
| | valve is plugged (316-323) |
| • | The drive to governor orifice is plugged |
|
Intermediate
Band (606)
| Burned or
worn
|
Case
Cover (401)
|
| • | The second oil passage is leaking |
|
Case (15)
|
| • | Leaks in the governor passage or pipe (138) |
| • | Leaks in the second oil passage |
|
