Step | Action | Yes | No | ||||
|---|---|---|---|---|---|---|---|
1 | Did you review the General Description and perform the necessary inspections? | Go to Step 2 | |||||
2 | Verify that the ride is too hard. Does the vehicle ride normally? | System OK | Go to Step 3 | ||||
3 | Inspect the tires for the proper inflation pressure. Refer to Tire Inflation Pressure Specifications in Maintenance and Lubrication. Is the tire inflation pressure correct? | Go to Step 5 | Go to Step 4 | ||||
4 | Inflate the tires to the correct pressure. Did you complete the repair? | Go to Step 5 | -- | ||||
5 | Inspect the following suspension components for wear or damage:
Refer to Suspension Strut and Shock Absorber Testing - On Vehicle . Are any of the components the worn or damaged? | Go to Step 6 | Go to Step 7 | ||||
6 | Replace all of the worn or damaged components. For any strut component replacement, refer to Strut, Strut Component, and Spring Replacement in Front Suspension or Shock Absorber Replacement in Rear Suspension. Did you complete the repair? | Go to Step 7 | -- | ||||
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
