GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Cavalier 🢒 HVAC 🢒 HVAC Systems - Manual 🢒 Temperature Control Cable Replacement

Temperature Control Cable Replacement Chevrolet

Removal Procedure

    Object Number: 603652 Size: SH
  1. Remove the IP trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages and Console.
  2. Disconnect the temperature control cable from the temperature door lever.
  3. Remove the cable clip retaining screw.

    4. Object Number: 603659 Size: SH
  4. Remove the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement .
  5. Remove the cable cover.
  6. Remove the cable clip from the HVAC control assembly.
  7. Remove the temperature control cable.

Installation Procedure

    Object Number: 603659 Size: SH
  1. Install the temperature control cable to the HVAC control assembly.
  2. Lock the cable clip to the HVAC control assembly.
  3. Install the cable cover.

    4. Object Number: 603652 Size: SH
  4. Install the cable to the temperature door lever.

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the cable clip and screw to the HVAC module assembly.

    6. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  6. Install the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement .
  7. Install the IP trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages and Console.

Temperature Control Cable Replacement Pontiac

Removal Procedure

    Object Number: 603652 Size: SH
  1. Remove the IP carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.
  2. Disconnect the temperature control cable from the temperature door lever.
  3. Remove the cable clip retaining screw.
  4. Remove the HVAC control assembly.

    5. Object Number: 603659 Size: SH
  5. Remove the cable cover.
  6. Remove the cable clip from the HVAC control assembly.
  7. Remove the temperature control cable.

Installation Procedure

    Object Number: 603659 Size: SH
  1. Install the temperature control cable to the HVAC control assembly.
  2. Lock the cable clip to the HVAC control assembly.
  3. Install the cable cover.
  4. Install the HVAC control assembly.

    5. Object Number: 603652 Size: SH
  5. Install the cable to the temperature door lever.

    6. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Install the cable clip and screw to the HVAC module assembly.

    7. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  7. Install the IP carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.