Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Raise the vehicle and support the vehicle with safety stands.
- Attach a hose to a rear bleeder screw.
- Immerse the other end of the hose in a container partly filled
with clean brake fluid.
- Ensure that the master cylinder is full.
- Turn the ignition ON.
- Apply and hold moderate pressure on the brake pedal.
Does the BRAKE lamp light?
| --
| Go to
Step
2
| Go to
Step 4
|
2
|
- Close the bleeder screw.
- Release the brake pedal.
- Apply and hold moderate pressure on the brake pedal.
Does the BRAKE lamp remain lit?
| --
| Go to
Step
6
| Go to
Step 3
|
3
|
- Attach a hose to a front bleeder screw.
- Immerse the other end of the hose in a container partly filled
with clean brake fluid.
- Ensure that the master cylinder is full.
- Apply and hold moderate pressure on the brake pedal.
- Open the bleeder valve.
Does the BRAKE lamp light?
| --
| Go to
Step
5
| Go to
Step 4
|
4
|
- Close the bleeder screw.
- Release the brake pedal.
- Replace the combination valve . Refer to
Is the repair complete?
| --
| Go to
Step
7
| --
|
5
|
- Close the bleeder screw.
- Release the brake pedal.
- Apply and hold moderate pressure on the brake pedal.
Does the BRAKE lamp remain lit?
| --
| Go to
Step
6
| System OK
|
6
| Replace the combination valve. Refer to
Combination Valve Replacement
.
Are the repairs complete?
| --
| Go to
Step
7
| --
|
7
| Verify the repair.
Is the repair complete?
| --
| System OK
| Go to
Step
1
|
