Tools Required
J 41352 Modular Column Holding Fixture

1. Remove the upper and lower shrouds. Refer to Steering Column Trim Cover Replacement - Off Vehicle .



2. Use the tilt lever to tilt the column in the "UP" position.




Caution: The tilt spring and the spring guide are under pressure and could become a projectile. During the disassembly and assembly procedures, secure the tilt spring with locking pliers. Exercise caution when removing or installing the tilt spring and the spring guide, as bodily injury may result.

3. Remove the tilt spring (1).

3.1.	Pry the tilt spring up until a bulge occurs and most of the tilt spring tension is removed.

3.2.	Secure the tilt spring and continue prying until the tilt spring disengages from the post on the steering column support assembly (2) and the steering column tilt head assembly (3).




4. Remove the spring guide (1) from the tilt spring (2).

Tools Required
J 41352 Modular Column Holding Fixture

1. Install the spring guide (1) to the tilt spring (2). Lubricate with synthetic grease.




Caution: The tilt spring and the spring guide are under pressure and could become a projectile. During the disassembly and assembly procedures, secure the tilt spring with locking pliers. Exercise caution when removing or installing the tilt spring and the spring guide, as bodily injury may result.

2. Install the tilt spring (1).

2.1.	Install the tilt spring (1) to the post on the steering column support assembly (2).

2.2.	Secure the tilt spring (1).

3. Install the upper and lower shrouds. Refer to Steering Column Trim Cover Replacement - Off Vehicle .