Name | Location | Locator View | Connector End View |
|---|---|---|---|
Backup Lamps Switch | In the transmission range (TR) shift control | ||
Brake Lamps Relay | In the engine wiring harness junction block (underhood fuse relay center), bottom relay, second from right | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Daytime Running Lamps (DRL) Control Module | Taped to the wiring harness above the IP wiring harness junction block | ||
Daytime Running Lamps (DRL) Diode Module | On the left side of the steering column support | ||
Daytime Running Lamps (DRL) Relay | In the IP wiring harness junction block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Diode Network | Taped to the wiring harness near the IP wiring harness junction block | Hydraulic Brake Component Views in Hydraulic Brakes | Hydraulic Brake Connector End Views in Hydraulic Brakes |
Engine Wiring Harness Junction Block (Underhood Fuse Relay Center) | At the lower LH corner of the cowl | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Fuse Block | Body builder installed | Electrical Center Identification Viewsin Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Headlamps Dimmer Switch | On the steering column, left side, part of the multifunction switch | ||
Headlamps Switch | Body builder installed | -- | |
Ignition Switch | On the right side of the steering column | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Instrument Cluster | Body builder installed | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
Instrument Panel Lamps Dimmer Switch | Body builder installed | -- | |
IP Wiring Harness Junction Block | At lower left corner of the cowl on the IP side | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Stoplamps Switch | On the brake pedal linkage | ||
Transmission Range (TR) Lamp | In the transmission range (TR) shift control | ||
Turn/Hazard Lamp Switch | On the steering column, left side, part of the multifunction switch | ||
Turn/Hazard Lamp Flasher | In the IP wiring harness junction block, at lower left corner of the cowl on the IP side | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
C100 | At the lower left corner of the bulkhead; the IP harness end is attached to the bulkhead | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C104 | On the engine side of the bulkhead near C100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C110 | On top of the transmission | -- | Inline Harness Connector End Views in Wiring Systems |
C112 | On top of the transmission | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C202 | On top of the steering column support | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 | On top of the steering column support | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C402 | RH frame rail to the rear of the fuel tank | -- | Inline Harness Connector End Views in Wiring Systems |
C403 | RH frame rail to the rear of the fuel tank | -- | Inline Harness Connector End Views in Wiring Systems |
C412 | In the rear chassis harness, 250 cm (98 in) from the fuel module breakout toward C300 | -- | Inline Harness Connector End Views in Wiring Systems |
C503 | Tail lamp harness, 145 cm (59 in) from C403 | -- | Inline Harness Connector End Views in Wiring Systems |
G102 | On the front center of the engine, at the thermostat housing | Power and Grounding Component Views in Wiring Systems | -- |
G104 | Rear of the RH cylinder bank | Power and Grounding Component Views in Wiring Systems | -- |
G105 | Front frame crossmember, body builder installed | -- | -- |
G106 | Front frame crossmember, body builder installed | -- | -- |
G107 | Front frame crossmember, body builder installed | -- | -- |
G200 | On top of the steering column support | Power and Grounding Component Views in Wiring Systems | -- |
G400 | Rear chassis harness components ground, on the right frame rail near the park brake pump | Power and Grounding Component Views in Wiring Systems | -- |
P100 | At the lower left corner of the bulkhead | Harness Routing Views in Wiring Systems | -- |
S101 | In the engine harness, 20 cm (8 in) from the generator breakout toward the fuel injector breakout | Harness Routing Views in Wiring Systems | -- |
S102 | In the engine harness, 27 cm (11 in) from the fuel injector breakout toward the generator breakout | Harness Routing Views in Wiring Systems | -- |
S110 | In the breakout for the PCM connectors, 10 cm (4 in) from the main engine harness | Harness Routing Views in Wiring Systems | -- |
S112 | In the engine harness, 7 cm (3 in) from the breakout for the PCM toward the breakout for the generator | -- | -- |
S122 | In the engine harness, 7 cm (3 in) from the breakout to the engine wiring harness junction block (underhood fuse relay center) | Harness Routing Views in Wiring Systems | -- |
S150 | Body Builder Installed | -- | -- |
S152 | Forward lamp harness, 5 cm (2 in) from the RH headlamp breakout toward C100 | -- | -- |
S153 | Forward lamp harness, 9 cm (4 in) from the LH headlamp breakout toward the RH headlamp breakout | -- | -- |
S154 | Forward lamp harness, 5 cm (2 in) from the LH headlamp breakout toward C100 | -- | -- |
S155 | In the forward lamp harness, approximately 25 cm (10 in) from the LH outer headlamp | -- | -- |
S200 | In the IP harness, 7 cm (3 in) toward the IP wiring harness junction block from the breakout for C201 | Harness Routing Views in Wiring Systems | -- |
S201 | In the IP harness, 11 cm (4 in) toward the IP wiring harness junction block from the breakout for the transmission range control | Harness Routing Views in Wiring Systems | -- |
S202 | In the IP harness, 16 cm (6 in) toward the IP wiring harness junction block from the breakout for the transmission range control | Harness Routing Views in Wiring Systems | -- |
S207 | In the IP harness, 25 cm (1 in) toward the stoplamp switch breakout from the transmission range control breakout | Harness Routing Views in Wiring Systems | -- |
S208 | In the IP harness, 4 cm (2 in) toward the stoplamp switch breakout from the transmission range control breakout | Harness Routing Views in Wiring Systems | -- |
S209 | In the IP harness, 8 cm (3 in) toward the stoplamp switch breakout from the transmission range control breakout | Harness Routing Views in Wiring Systems | -- |
S211 | In the IP harness, on the breakout to the transmission range control, 18 cm (7 in) from the main harness | Harness Routing Views in Wiring Systems | -- |
S215 | In the IP harness, on the breakout to the steering column connector, 17 cm (7 in) from the main harness | Harness Routing Views in Wiring Systems | -- |
S216 | In the IP harness, on the breakout to the steering column connector, 14 cm (6 in) from the main harness | Harness Routing Views in Wiring Systems | -- |
S217 | In the IP harness, on the breakout to the steering column connector, 12 cm (5 in) from the main harness | Harness Routing Views in Wiring Systems | -- |
S219 | In the IP harness, on the breakout to the steering column connector, 7 cm (3 in) from the main harness | Harness Routing Views in Wiring Systems | -- |
S221 | In the IP harness, 9 cm (3 in) toward the speedometer adapter module from the transmission range control breakout | Harness Routing Views in Wiring Systems | -- |
S222 | In the IP harness, 5 cm (2 in) toward the fuse block from the stoplamp switch breakout | Harness Routing Views in Wiring Systems | -- |
S223 | In the IP harness stoplamp switch breakout, 30 cm (12 in) from the main harness | Harness Routing Views in Wiring Systems | -- |
S225 | In the IP harness, 3 cm (1 in) toward the fuse block from the stoplamp switch breakout | Harness Routing Views in Wiring Systems | -- |
S226 | In the IP harness, 6 cm (2 in) toward the fuse block from the stoplamp switch breakout | Harness Routing Views in Wiring Systems | -- |
S227 | In the IP harness breakout for the fuse block, 28 cm (11 in) from the breakout for C202 and C203 | Harness Routing Views in Wiring Systems | -- |
S231 | In the IP harness breakout for the fuse block, 54 cm (21 in) from the breakout for C202 and C203 | Harness Routing Views in Wiring Systems | -- |
S233 | In the IP extension harness, 30 cm (12 in) toward the headlamp switch, from the main harness | -- | -- |
S234 | In the IP extension harness, 19 cm (7 in) from the instrument cluster connector | -- | -- |
S235 | In the IP extension harness, 12 cm (5 in) from the instrument cluster connector | -- | -- |
S236 | In the IP harness, on the breakout to the steering column connector, 9 cm (4 in) from the main harness | Harness Routing Views in Wiring Systems | -- |
S401 | In the rear chassis harness, 100 cm (39 in) forward of the breakout for the fuel pump | -- | -- |
S407 | In the rear chassis harness, 22 cm (9 in) rear of the breakout for the LH rear heated oxygen sensor | Harness Routing Views in Wiring Systems | -- |
S500 | In the RH marker light branch of the tail and stoplamp harness, 5 cm (2 in) from the breakout to the RH taillamp | -- | -- |
S501 | In the LH marker light branch of the tail and stoplamp harness, 5 cm (2 in) from the breakout to the LH taillamp | -- | -- |
S502 | In the tail and stoplamp harness, 110 cm (43 in) from the connectors to the rear chassis harness | -- | -- |
S503 | In the tail and stoplamp harness, 100 cm (39 in) from the connectors to the rear chassis harness | -- | -- |
S504 | In the tail and stoplamp harness, 12 cm (4 in) from the connectors to the rear chassis harness | -- | -- |
