Wipers High Mode Inoperative, Low Mode Operates. Chevrolet Chevy P12 Chassis 1998

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 1998 🢒 Chevy P12 Chassis 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Wipers High Mode Inoperative, Low Mode Operates

Step	Action	Value(s)	Yes	No
1	Disconnect the windshield wiper motor connector. Turn the ignition switch to the ACC or RUN position. Turn the windshield wiper switch to the HIGH position. Connect a test light from CKT 92 (PPL) at the windshield wiper motor connector to ground. Does the test light illuminate?	--	Go to Step 2	Go to Step 3
2	Replace the windshield wiper motor. Is the repair complete?	--	System OK	--
3	Connect a test light from the windshield wiper switch connector, cavity E 3 to ground. Does the test light illuminate?	--	Go to Step 4	Go to Step 5
4	Locate and repair the open in CKT 92 (PPL) between the windshield wiper switch connector and the windshield wiper motor connector. Is the repair complete?	--	System OK	--
5	Replace the windshield wiper switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column - Tilt. Is the repair complete?	--	System OK	--