GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the plugs and the screws securing the shift control housing to the shift control.
  2. Remove the nut, the washer, and the clip securing the shift cable to the shift control.

  3. Object Number: 241012  Size: SH
  4. Remove the cotter pin and the clevis pin securing the shift cable to the transmission shift lever.

  5. Object Number: 241011  Size: SH
  6. Note the positions of the clamps securing the shift cable to the body/chassis, if any.

Installation Procedure

    Notice: Ensure the shift control lever and the transmission shift lever are in the mechanical neutral position.

  1. Position the cable into place at the shift column and the transmission.

  2. Object Number: 241012  Size: SH
  3. Install the nut, the washer, and the clip in order to secure the shift cable to the shift control.
  4. Align the shift cable clevis end to the transmission shift lever.
  5. Adjust the shift cable. Refer to Shift Cable Adjustment .
  6. Install the clevis pin and retaining clip to the transmission shift lever.