Figure 1: |
IP Wiring Harness Junction Block, Front View | |
Figure 2: |
Fuse Block, Front View |
Fuse/Circuit Breaker | Rating | Description |
---|---|---|
STOP/HAZ Fuse 1 | 20A | Multifunction Alarm Module, Turn Signal Switch, and the Stoplamps Switch |
TAC Fuse 2 | 15A | Throttle Actuator Control (TAC) Module |
CTSY Fuse 3 | 20A | Provision for Body Builder (Courtesy/Dome Lamp) |
GAUGES Fuse 4 | 10A | IP Cluster, Speedometer Adapter Module, Daytime Running Lamps Control (DRL) Module, DRL Relay, and the Multifunction Alarm Module |
LH TAIL Fuse 5 | 5A | LH Tail and Marker Lamps |
CRUISE Fuse 6 | 10A | Cruise Control Switch |
AUX PWR Fuse 7 | 20A | Provisions for Body Builder (Aux Pwr Feed) |
CRANK Fuse 8 | 5A | Crank Request to Powertrain Control Module |
PK LPS Fuse 9 | 20A | Headlamps Switch |
TURN-B/U Fuse 10 | 15A | Backup Lamps Switch and Turn Signal Switch |
RH TAIL Fuse 11 | 5A | RH Tail and Marker Lamps |
JACK Fuse 12 | 5A | Provisions for Body Builder (Jack Down Alarm) |
CIG LTR Fuse 13 | 20A | Provisions for Body Builder (Cig Ltr Feed) |
ILLUM Fuse 14 | 10A | IP Cluster, Multifunction Alarm Module, Transmission Range Lamp, and Provision for Body Builder (IP Lamps Dimming) |
DRL Fuse 15 | 20A | DRL Diode Module |
RADIO/ACC Fuse 16 | 15A | Provisions for Body Builder (Radio and Accessory Feed) |
MKR LPS Fuse 17 | 10A | License Lamps and Provisions for Body Builder (Marker Lamps) |
BRAKE Fuse 18 | 10A | Stoplamps Switch and Electronic Brake Control Module (EBCM) |
RADIO BATT Fuse 19 | 10A | Provisions for Body Builder (Radio Battery Feed) |
Fuse 20 | -- | Not Used |
DATA Fuse 21 | 10A | Data Link Connector |
WIPER Fuse 22 | 25A | Windshield Wiper Switch and Windshield Wiper Pulse Control Module |
FRT PARK Fuse 23 | 5A | Front Marker and Park Lamps |
STEP Fuse 24 | 5A | Provisions for Body Builder (Step Down Alarm) |
POWER ACCY 1 Circuit Breaker | 30A | Provisions for Body Builder (Power Accessory 1 Feed) |
POWER ACCY 2 Circuit Breaker | 30A | Provisions for Body Builder (Power Accessory 2 Feed) |