Name | Location | Locator View | Connector End View |
|---|---|---|---|
Fuse Block | Body builder installed | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Instrument Cluster | Body builder installed | -- | |
IP Wiring Harness Junction Block | At the lower left corner of the cowl on the IP side | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Key-in Warning Switch | On the right side of the steering column, part of the ignition switch housing | ||
Multifunction Alarm Module | At the lower left corner of the IP wiring harness junction block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
C100 | At the lower left corner of the bulkhead; the IP harness end is attached to the bulkhead | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C202 | On top of the steering column support | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 | On top of the steering column support | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G102 | On the front center of the engine, at the thermostat housing | Power and Grounding Component Views in Wiring Systems | -- |
G200 | On the top of the steering column support | Power and Grounding Component Views in Wiring Systems | -- |
S110 | In the engine harness, 13 cm (5 in) from the breakout for the PCM toward the breakout for the generator | Harness Routing Views in Wiring Systems | -- |
S201 | In the IP harness, 11 cm (4 in) toward the IP wiring harness junction block from the breakout for the transmission range control | Harness Routing Views in Wiring Systems | -- |
S202 | In the IP harness, 16 cm (6 in) toward the IP wiring harness junction block from the breakout for the transmission range control | Harness Routing Views in Wiring Systems | -- |
S221 | In the IP harness, 9 cm (3 in) toward the speedometer adapter module from the transmission range control breakout | Harness Routing Views in Wiring Systems | -- |
S222 | In the IP harness, 5 cm (2 in) toward the fuse block from the stoplamp switch breakout | Harness Routing Views in Wiring Systems | -- |
S223 | In the IP harness stoplamp switch breakout, 30 cm (12 in) from the main harness | Harness Routing Views in Wiring Systems | -- |
S226 | In the IP harness, 6 cm (2 in) toward the fuse block from the stoplamp switch breakout | Harness Routing Views in Wiring Systems | -- |
S234 | In the IP extension harness, 19 cm (7 in) from the instrument cluster connector | -- | -- |
