GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Chevy P12 Chassis 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Multifunction Alarm Module Replacement

Removal Procedure

    Object Number: 290808 Size: SH

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Disconnect the negative battery cable.
  2. Remove the multifunction alarm module from the IP Wiring Harness Junction Block.

Installation Procedure

    Object Number: 290808 Size: SH
  1. Install the multifunction alarm module into the IP Wiring Harness Junction Block.

    2. Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  2. Connect the negative battery cable.