Name | Location | Locator View | Connector End View |
|---|---|---|---|
Daytime Running Lamps (DRL) Control Module | Taped to the wiring harness, above the IP wiring harness junction block | Lighting Systems Component Views in Lighting Systems | Lighting Systems Connector End Views in Lighting Systems |
Diode Network | Taped to the IP harness, near the left side of the steering column support | Hydraulic Brake Component Views in Hydraulic Brakes | Hydraulic Brake Connector End Views in Hydraulic Brakes |
Engine Coolant Temperature (ECT) Sensor | On the RH side of the engine, near the center, above the spark plugs | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Engine Coolant Level Switch | On the right side of the coolant surge tank, above the radiator | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Engine Oil Pressure Sensor | At the rear of the engine between the block and the bell housing | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Fuel Pump Module | On top of the fuel tank | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Fuse Block | Body builder installed | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Ignition Switch | On the right side of the steering column | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Instrument Cluster | Body builder installed | -- | |
IP Wiring Harness Junction Block | At the lower left corner of the cowl on the IP side | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Powertrain Control Module (PCM) | Above the radiator, to the right of the driver island | Engine Controls Component Views in Engine Controls | Powertrain Control Module Connector End Views in Engine Controls |
Speedometer Adapter Module | On the left side of the steering column support | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
C100 | At the lower left corner of the bulkhead; the IP harness end is attached to the bulkhead | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C101 | On the engine side of the bulkhead, near C100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C110 | On top of the transmission | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C202 | On top of the steering column support | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 | On top of the steering column support | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G102 | On the front center of the engine, at the thermostat housing | Power and Grounding Component Views in Wiring Systems | -- |
G104 | Rear of the RH cylinder bank | Power and Grounding Component Views in Wiring Systems | -- |
G200 | On top of the steering column support | Power and Grounding Component Views in Wiring Systems | -- |
G400 | Rear chassis harness components ground, on the right frame rail near the park brake pump | Power and Grounding Component Views in Wiring Systems | -- |
P100 | Lower left corner of the bulkhead | Harness Routing Views in Wiring Systems | |
S101 | In the engine harness, 20 cm (8 in) from the generator breakout toward the fuel injector breakout | Harness Routing Views in Wiring Systems | -- |
S102 | In the engine harness, 27 cm (11 in) from the fuel injector breakout toward the generator breakout | Harness Routing Views in Wiring Systems | -- |
S110 | In the breakout for the PCM connectors, 10 cm (4 in) from the main engine harness | Harness Routing Views in Wiring Systems | -- |
S119 | In the engine harness branch leading to the ABS system, 7 cm (3 in) from the breakout for the RH wheel speed sensor | Harness Routing Views in Wiring Systems | -- |
S200 | In the IP harness, approximately 7 cm (3 in) toward the IP wiring harness junction block from the steering column harness breakout | Harness Routing Views in Wiring Systems | -- |
S202 | In the IP harness, 16 cm (6 in) toward the IP wiring harness junction block from the breakout for the transmission range control | Harness Routing Views in Wiring Systems | -- |
S210 | In the IP harness, 5 cm (2 in) toward the stoplamp switch breakout from the transmission range control breakout | Harness Routing Views in Wiring Systems | -- |
S216 | In the IP harness, on the steering column breakout, approximately 14 cm (6 in) from the main harness | Harness Routing Views in Wiring Systems | -- |
S221 | In the IP harness, 9 cm (3 in) toward the speedometer adapter module from the transmission range control breakout | Harness Routing Views in Wiring Systems | -- |
S222 | In the IP harness, 5 cm (2 in) toward the fuse block from the stoplamp switch breakout | Harness Routing Views in Wiring Systems | -- |
S226 | In the IP harness, approximately 6 cm (2 in) toward the IP fuse block from the stoplamp switch breakout | Harness Routing Views in Wiring Systems | -- |
S234 | In the IP extension harness, 19 cm (7 in) from the instrument cluster connector | -- | -- |
S235 | In the IP extension harness, 12 cm (5 in) from the instrument cluster connector | -- | -- |
S401 | In the rear chassis harness, 100 cm (39 in) foward of the breakout for the fuel pump | -- | -- |
