Name | Location | Locator View | Connector End View |
---|---|---|---|
Horn Relay | In the engine wiring harness junction block (underhood fuse relay center), inner column of relays, top relay, (see the label on the inside of the cover for the engine wiring harness junction block) | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Engine Wiring Harness Junction Block (Underhood Fuse Relay Center | At the lower LH corner of the cowl | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Horn Switch | In the center of the steering wheel | -- | |
Horn , A-Note (High) | Body builder installed | -- | |
Horn, F-Note (Low) | Body builder installed | -- | |
IP Wiring Harness Junction Block | At the lower left corner of the cowl on the IP side | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
C100 | At the lower left corner of the bulkhead; the IP harness end is attached to the bulkhead | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C101 | On the engine side of the bulkhead, near C100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C104 | On the engine side of the bulkhead near C100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G106 | On the front frame crossmember, body builder installed | -- | -- |
P100 | At the lower left corner of the bulkhead | Harness Routing Views in Wiring Systems | -- |
S120 | In the branch to the engine wiring harness junction block (underhood fuse relay center), 10 cm (4 in) from the main engine harness | Harness Routing Views in Wiring Systems | -- |
S150 | Forward Lamp Harness, 18 cm (7 in) from the RH headlamp breakout toward C 100 | -- | -- |
S156 | Forward Lamp Harness, 27 cm (11 in) from the LH headlamp breakout toward C 100 | -- | -- |
S206 | In the IP harness, 15 cm (6 in) toward the IP wiring harness junction block from the breakout for the transmission range control | Harness Routing Views in Wiring Systems | -- |