Step | Action | Value(s) | Yes | No | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Hydraulic Brake System Diagnostic Check performed? | -- | Go to Step 2 | Go to Brake System Diagnosis | ||||||||||||
2 | Inspect the front suspension for loose or missing components. Are there any loose or missing components? | -- | Go to Step 3 | Go to Step 4 | ||||||||||||
3 | Tighten, repair, or replace the missing components as necessary. Refer to Fastener Tightening Specifications in Front Suspension. Is the repair complete? | - | Go to Step 8 | -- | ||||||||||||
4 | Inspect the disc brake pads and brake shoe linings for the following:
Do any of the above conditions exist? | -- | Go to Step 5 | Go to Step 6 | ||||||||||||
5 | Replace the brake linings. Refer to the appropriate procedure:
Is the repair complete? | -- | Go to Step 8 | -- | ||||||||||||
6 | Test the wheel assemblies for an out of balance condition. Are any of the wheel assemblies out of balance? | -- | Go to Step 7 | System OK | ||||||||||||
7 | Balance the wheel assembly. Refer to Tire and Wheel Balancing in Vibration Diagnosis and Correction. Is the repair complete? | -- | Go to Step 8 | -- | ||||||||||||
8 | Verify proper brake system operation. Does the original condition still exist? | -- | Verify the customer concern. Go to Step 1 | System OK |
