GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Chevy P32 RV/Van Chassis 🢒 Brakes 🢒 Park Brake 🢒 Park Brake Pull Switch Replacement

Removal Procedure

    Object Number: 223663 Size: SH
  1. Disconnect the electrical connector (6) from the back of the pull switch (5).
  2. Use a small hammer and a drift punch in order to remove the retaining pin from the pull switch knob. Drive the pin out gently.
  3. Slide the pull switch knob (1) off the shaft.
  4. Remove the pull switch mounting nut (2) and the washer (3).
  5. Slide the pull switch (5) out the back of the mounting bracket (4).

Installation Procedure

    Object Number: 223663 Size: SH
  1. Install the pull switch (5) into the mounting bracket (4).
  2. Install the pull switch washer (3) and the mounting nut (2).

    3. Tighten
    Tighten the nut (2) to 3 N·m (27 lb in).

  3. Slide the pull switch knob (1) onto the pull switch shaft.
  4. Install the retaining pin to the pull switch knob. Drive the pin in gently.