Courtesy or Dome Lamps Always On P32
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Does the test light illuminate? | -- | Go to Step 2 | Go to Step 5 |
2 |
Does the test light illuminate? | -- | Go to Step 3 | Go to Step 4 |
3 | Locate and repair the short to B+ in CKT 157 (GRY) between C210 and the headlamp/panel dimmer switch. Did you complete the repair? | -- | System OK | -- |
4 | Replace the headlamp/panel dimmer switch. Did you complete the repair? | -- | System OK | -- |
5 | Connect a test light from C210 of the body builders wire harness connector, cavity A to ground. Does the test light illuminate? | -- | Go to Step 6 | System OK |
6 |
Did you complete the repair? | -- | System OK | -- |
Courtesy or Dome Lamps Always On P42
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Disconnect connector C207 (P42), or C210 (P32). Does the dome lamp remain on? | -- | Go to Step 2 | Go to Step 3 |
2 | Repair the short to ground or to B+ in the wiring beyond connector C207 (P42), or C210 (P32). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | System OK | -- |
3 |
Did the test light illuminate? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair the short to ground in CKT 156 (WHT). Did you complete the repair? | -- | System OK | -- |
5 | Replace the IP lamps dimmer switch. Did you complete the repair? | -- | System OK | -- |
