Was the Hydraulic Brake System Diagnostic Check performed?

--

Go to Step 2

Go to Brake System Diagnosis

Inspect the disc brake pads and brake shoe linings for the following:

Do any of the above conditions apply?

--

Go to Step 3

Go to Step 4

Replace the brake linings. Refer to Brake Pads Replacement in Disc Brakes or Brake Lining Replacement in Drum Brakes.

Is the repair complete?

-

Go to Step 8

--

Inspect the brake rotors for the following: heat spotting or scoring.

Do any of the above conditions apply?

--

Go to Step 5

Go to Step 6

1. Refinish the rotor. Refer to Brake Rotor Refinishing in Disc Brakes.
2. If refinishing the brake rotor results in a thickness that is less than the thinnest (refinishing) thickness, replace the rotor. Refer to Brake Rotor Replacement in Disc Brakes.

Is the repair complete?

-

Go to Step 8

--

Inspect brake assembly for loose, broken or missing attachments. Refer to Brake Pad Inspection in Disc Brakes or Brake Shoe Inspection in Drum Brakes.

Are there any loose, broken or missing attachments?

--

Go to Step 7

System OK

Tighten or replace the loose, broken or missing brake assembly components.

Is the repair complete?

-

Go to Step 8

--

Verify proper brake system operation.

Does the original condition still exist?

--

Go to Step 1

System OK