Roof Weld Joint Reveal Molding Replacement (Ditch Molding) - kw GMT355 trim information left panel right seam top cap

When servicing the vehicle with the VIN you entered, the following diagnosis might be helpful if the vehicle exhibits the described symptoms.

Vehicles built before 02/09/04 have shorter moldings and different end caps that are no longer available from SPO. If one of the old moldings or end caps need to be replaced all the other moldings and end caps will also need to be replaced.

Replace the left and right moldings and end caps with current SPO stock.

.

Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. If these steps do not resolve the condition, please contact GM TAC for further diagnostic assistance. This diagnostic approach was developed for the vehicle with the VIN you entered and should not be automatically be used for other vehicles with similar symptoms.

(2004 Chevrolet/GMC Colorado/Canyon Regular Cab built before 02/09/04)

.