APPLICATION: 1993 Corvette prior to V. I.N.'s: Non-ZR1 - P5110787 ZR1 - P5800217
--------- The hood release cable may become disengaged from the hood latch lever.
---------- Replace the hood latches wkh service P/N's 10210747 (Left) and 10210748 (Right)
- Obtain material locally and fabricate the tool shown on the illustration from 3/16" or 1/4' steel rod.
- With the door open, locate the short bent end of the tool inboard of the vertical flange of the hood latch support.
- insert the tool forward until the tape is aligned with the lower end of the windshield pillar molding.
- Twist the tool to contact and move the latch lever until the latch disengages. A slight downward pressure on the hood in the latch area may be helpful to disengage the latch lever.
PART AVAILABILITY: Parts are currently available from GMSPO.
WARRANTY INFORMATION: Labor Operation: T1951 Replace Both Latches Labor Time: 0.4 Hr. (includes using tool to open hood.)
Labor Operation: T1950 Fabricate Tool Labor Time: 0.1 Hr. This operation may only be used once per dealer $2.00 Dealer net material allow.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.