Step | Action | Yes | No | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Hydraulic Brake Diagnostic System Check performed? | Go to Step 2 | ||||||||||||||
2 | Inspect the brake pads for the following:
Do any of the above conditions exist? | Go to Step 3 | Go to Step 4 | |||||||||||||
3 | Replace the brake pads as necessary. Refer to Brake Pads Replacement in Disc Brakes. Is the repair complete? | -- | ||||||||||||||
4 | Inspect the brake rotors for the following:
Refer to Brake Rotor Lateral Runout Check . Do any of the above conditions exist? | Go to Step 5 | Go to Step 6 | |||||||||||||
5 | Resurface or replace the brake rotor as necessary. Refer to Brake Rotor Refinishing , Front Brake Rotor Replacement or Rear Brake Rotor Replacement in Disc Brakes. Is the repair complete? | -- | ||||||||||||||
6 | Inspect brake assembly for loose, broken or missing components. Refer to Brake Pad Inspection in Disc Brakes. Are there any loose, broken or missing components? | Go to Step 7 | Go to Step 8 | |||||||||||||
7 | Repair or replace the components as necessary. Is the repair complete? | -- | ||||||||||||||
8 | Verify proper brake system operation. Does the original condition still exist? | Go to Step 1 | System OK | |||||||||||||
