Was the Hydraulic Brake System Diagnostic Check performed?

Go to Step 2

Go to Hydraulic Brake Diagnostic System Check

Inspect the suspension for loose or missing components.

Are there any loose or missing components?

Go to Step 3

Go to Step 4

Tighten, repair or replace the missing components as necessary. Refer to Fastener Tightening Specifications in Front Suspension or Fastener Tightening Specifications in Rear Suspension.

Is the repair complete?

Go to Step 8

--

Inspect the brake pads for the following conditions:

Refer to Brake Pad Inspection in Disc Brakes.

Do any of the above conditions apply?

Go to Step 5

Go to Step 6

Replace the brake pads. Refer to Brake Pads Replacement in Disc Brakes.

Is the repair complete?

Go to Step 8

--

Inspect the tire and wheel assemblies for an out of balance condition.

Are any of the tire and wheel assemblies out of balance?

Go to Step 7

Go to Step 8

Balance the wheel assembly. Refer to Vibration Diagnosis in Vibration Diagnosis and Correction.

Is the repair complete?

Go to Step 8

--

Verify proper brake system operation.

Does the brake system operate properly?

System OK

Go to Hydraulic Brake Diagnostic System Check