The power steering gear inlet (pressure) hose is grounding out.

1. Check for proper mounting and clearance.
2. Adjust for proper mounting and clearance.

Refer to Power Steering Hoses Replacement .

The rack bearing adjust is loose.

Torque the rack bearing adjust to proper specifications.

Refer to Rack and Pinion Gear Rack Bearing Preload Adjustment - Off Vehicle .

The steering gear is loose.

Torque the steering gear mounting bolts to proper specifications.

Refer to Power Steering Gear Replacement .

The tie rod ends are loose.

1. Inspect the tie rod ends.
2. Replace the tie rod ends as needed.

Refer to Tie Rod End Replacement - Outer .

The intermediate shaft univeral joints are loose.

Service and/or replace as needed.

Refer to Intermediate Steering Shaft Replacement .