Windshield Wiper and Washer Switch Assembly - Assemble - Off Vehicle Non-Telescoping Column

1. Slide the windshield wiper and washer switch assembly into the electric column lock until the clips engage.



2. Route the wire harness assembly along the steering column jacket assembly.
3. Connect the windshield wiper and washer switch assembly connector, if necessary.



4. Pop the wire harness assembly (1) into the wire harness strap (2).



5. Install the wire harness straps (2) to the steering column tilt head assembly (1).
6. Install the upper and lower trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .

Windshield Wiper and Washer Switch Assembly - Assemble - Off Vehicle Telescoping Column

1. Slide the windshield wiper and washer switch assembly into the electric column lock until the clips engage.



2. Route the wire harness assembly along the steering column jacket assembly.
3. Connect the windshield wiper and washer switch assembly connector, if necessary.



4. Install the wire harness strap (2) to the steering column tilt head assembly (1).
5. Install the wire harness strap (2) to the wire harness assembly.



6. Pop the wire harness assembly (1) into the wire harness strap (2).
7. Install the upper and lower trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .