GM Service Manual Online
For 1990-2009 cars only

Radio Display Inoperative, No Sound From Speakers

Step

Action

Value(s)

Yes

No

1

Were you sent here from the Radio Audio System Check

--

Go to Step 2

Go to Radio/Audio System Check

2

  1. Install a scan tool.
  2. Display the DTCs.

Are any communication (U codes) or BCM DTCs displayed?

--

Go to Diagnostic System Check - Body Control System

Go to Step 3

3

Inspect the RDO/CD fuse #5, in the instrument panel electrical center for an open.

Is the fuse open?

--

Go to Step 7

Go to Step 4

4

  1. Disconnect the radio connector C1.
  2. Connect a test light from the connector C1 terminal 10 to ground.

Does the test light illuminate?

--

Go to Step 5

Go to Step 8

5

Connect a test light between the radio connector C1 terminals 10 and 5.

Does the test light illuminate?

--

Go to Step 6

Go to Step 9

6

Replace the radio. Refer to Radio Replacement

Is the repair complete?

--

Go to Radio/Audio System Check

--

7

Repair the short to ground in circuit 440.

Is the repair complete?

--

Go to Radio/Audio System Check

--

8

Repair the open or high resistance condition in circuit 440.

Is the repair complete?

--

Go to Radio/Audio System Check

--

9

Repair the open or high resistance condition in circuit 351.

Is the repair complete?

--

Go to Radio/Audio System Check

--