GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 289908  Size: SH
  1. Remove the retainer attaching the front side rail seal to the number one bow.
  2. Remove the screws attaching the seal compression panel to the number one bow.
  3. Remove the panel.

Installation Procedure


    Object Number: 289908  Size: SH
  1. Position the seal compression panel to the number one bow.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws attaching the panel to the number one bow.
  4. Tighten
    Tighten the seal compression panel screws to 3  N·m (26 lb in).

  5. Install the fastener attaching the front side rail seal to the number one bow.