Step | Action | Yes | No | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Hydraulic Brake System Diagnostic Check performed? | Go to Step 2 | |||||||||||||
2 | Inspect the suspension for loose or missing components. Are there any loose or missing components? | Go to Step 3 | Go to Step 4 | ||||||||||||
3 | Tighten, repair or replace the missing components as necessary. Refer to Fastener Tightening Specifications in Front Suspension or Fastener Tightening Specifications in Rear Suspension. Is the repair complete? | Go to Step 8 | -- | ||||||||||||
4 | Inspect the brake pads for the following conditions:
Refer to Brake Pad Inspection in Disc Brakes. Do any of the above conditions apply? | Go to Step 5 | Go to Step 6 | ||||||||||||
5 | Replace the brake pads. Refer to Brake Pads Replacement in Disc Brakes. Is the repair complete? | Go to Step 8 | -- | ||||||||||||
6 | Inspect the tire and wheels for an out of balance condition. Are any of the tire and wheels out of balance? | Go to Step 7 | Go to Step 8 | ||||||||||||
7 | Balance the tire and wheel. Refer to Tire and Wheel Balancing in Vibration Diagnosis and Correction. Is the repair complete? | Go to Step 8 | -- | ||||||||||||
8 | Verify proper brake system operation. Does the brake system operate properly? | System OK |