Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Were you sent from the Lighting Systems Diagnostic System Check? | -- | ||
2 |
Does the scan tool display the switch status as ACTIVE when the switch is pressed? | -- | ||
3 | Inspect the F/TNK DR MiniFuse® #32 for an open. Is the fuse open? | -- | ||
4 | Repair the short to ground in the switch feed circuit 2840. Refer to Power Distribution Schematics in Wiring Systems. Is the repair complete? | -- | -- | |
5 |
Does the test light illuminate with the switch pressed? | -- | ||
6 |
Did you find and correct the condition? | -- | ||
7 |
Did you find and correct the condition? | -- | ||
8 | Replace the front fog lamp switch. Refer to Rear Compartment Lid Switch Replacement or Fog Lamp Switch Replacement . Is the repair complete? | -- | -- | |
9 | Does the front fog lamp indicator illuminate when the fog lamp switch is turned on? | -- | ||
10 | Inspect the FOG LP MiniFuse® #6 for an open. Is the fuse open? | -- | ||
11 |
Do the front fog lamps illuminate? | -- | ||
12 |
Did you find and correct the condition? | -- | ||
13 | Replace the FOG LP Micro Relay #39. Is the repair complete? | -- | -- | |
14 | Repair the short to ground in the front fog lamp feed circuit 34. Is the repair complete? | -- | -- | |
15 |
With the front fog lamp switch turned on does the test light illuminate? | -- | ||
16 | Test and repair the bulb ground circuit 150 for an open or high resistance. Did you find and correct the condition? | -- | ||
17 | Replace the front fog lamp bulbs. Refer to Front Fog Lamp Bulb Replacement . Is the repair complete? | -- | -- | |
18 | Repair the open or high resistance in the front fog lamp feed circuit 34. Is the repair complete? | -- | -- | |
19 | Replace the BCM. Refer to Body Control Module Replacement and Body Control Module (BCM) Programming/RPO Configuration . Is the repair complete? | -- | -- | |
20 |
Did you correct the condition? | -- | System OK |
